User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
System Mode Configuration Commands
161
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
smtp_auth type None, Plain, or CRAM-MD5 The type of authentication for the
SMTP server. If you select Plain or
CRAM-MD5, you also need to
configure the
smtp_auth username and
smtp_auth password keywords
and associated parameters.
smtp_auth username user name The user name for SMTP
authentication if you have set the
smtp_auth type keyword type to
Plain or CRAM-MD5.
smtp_auth password password The password for SMTP
authentication if you have set
smtp_auth type keyword to
Plain or CRAM-MD5.
identd_from_smtp_server_enable Y or N Allows or rejects Identd protocol
messages from the SMTP server.
Email log schedule
schedule unit Never, Hourly, Daily, or
Weekly
The type of schedule for the emailing
of logs and alerts. Note the following:
• If you select Never or Hourly,
you do not need to further
configure the schedule.
• If you select Daily, you also need
to configure the schedule time
and schedule meridiem
keywords and their associated
keywords.
• If you select Weekly, you also
need to configure the
schedule day,
schedule time, and
schedule meridiem keywords
and their associated keywords.
schedule day Sunday, Monday, Tuesday,
Wednesday, Thursday,
Friday, or Saturday
The scheduled day if you have set
the schedule unit keyword to
Weekly.
schedule time 0:00, 1:00, 2:00, 3:
00,
4:00, 5:00, 6:00, 7:00,
8:00, 9:00, 10:00, or
11:00
The scheduled time if you have set
the schedule unit keyword to
Daily or Weekly.
schedule meridiem AM or PM The meridiem for the start time if you
have set the schedule unit
keyword to Daily or Weekly.
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description










