User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
System Mode Configuration Commands
157
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Firewall Logs and Email Alerts Commands
system logging configure
This command configures routing logs for accepted and dropped IPv4 and IPv6 packets,
selected system logs, and logs for other events. After you have issued the system
logging configure command, you enter the system-config [logging-ipv4-ipv6] mode, and
then you can configure one keyword and associated parameter or associated keyword at a
time in the order that you prefer.
Step 1 Format system logging configure
Mode system
Step 2 Format lan_wan_accept_packet_logs {Y | N}
lan_wan_drop_packet_logs {Y | N}
lan_dmz_accept_packet_logs {Y | N}
lan_dmz_drop_packet_logs {Y | N}
dmz_wan_accept_packet_logs {Y | N}
dmz_wan_drop_packet_logs {Y | N}
wan_lan_accept_packet_logs {Y | N}
wan_lan_drop_packet_logs {Y | N}
dmz_lan_accept_packet_logs {Y | N}
dmz_lan_drop_packet_logs {Y | N}
wan_dmz_accept_packet_logs {Y | N}
wan_dmz_drop_packet_logs {Y | N}
change_of_time_by_NTP_logs {Y | N}
login_attempts_logs {Y | N}
secure_login_attempts_logs {Y | N}
reboot_logs {Y | N}
u
nicast_traffic_logs {Y | N}
broadcast_or_multicast_traffic_logs {Y | N}
WAN_status_logs {Y | N}
resolved_DNS_names_logs {Y | N}
vpn_logs {Y | N}
dhcp_server_logs {Y | N}
source_mac_filter_logs {Y | N}
session_limit_logs {Y | N}
bandwidth_limit_logs {Y | N}
Mode system-config [logging-ipv4-ipv6]