User's Manual

System Mode Configuration Commands
156
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N> system traffic_meter configure
system-config[traffic-meter]> enable Y
system-config[traffic-meter]> limit_type Downloadonly
system-config[traffic-meter]> monthly_limit 150000
system-config[traffic-meter]> increase_limit_enable Y
system-config[traffic-meter]> increase_limit_by 50000
system-config[traffic-meter]> counter SpecificTime
system-config[traffic-meter]> day_of_month 01
system-config[traffic-meter]> time_hour 00
system-config[traffic-meter]> time_minute 00
system-config[traffic-meter]> send_email_report Y
system-config[traffic-meter]> block_type Block-all-traffic-except-email
system-config[traffic-meter]> send_email_alert Y
system-config[traffic-meter]> save
Related show command: show system traffic_meter setup
time_hour hour The hour in the format HH (00 to 12)
that the traffic counter restarts. This
keyword applies only when you have
set the counter keyword to
SpecificTime.
time_meridian AM or PM The meridiem for the hour that the
traffic counter restarts. This keyword
applies only when you have set the
counter keyword to
SpecificTime.
time_minute minutes The minutes in the format MM (00 to
59) that the traffic counter restarts.
This keyword applies only when you
have set the counter keyword to
SpecificTime.
send_email_report Y or N Specifies whether or not an email
report is sent when the traffic counter
restarts.
Action when limit is reached
block_type Block-all-traffic, or
Block-all-traffic-except-email
Specifies the type of traffic blocking
after the meter has exceeded the
configured limit.
send_email_alert Y or N Specifies whether or not an email alert
is sent when the traffic limit is
reached.
Keyword Associated Keyword to Select or
Parameter to Type
Description