User's Manual

System Mode Configuration Commands
155
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
block_type {Block-all-traffic | Block-all-traffic-except-email}
send_email_alert {Y | N}
Mode system-config [traffic-meter]
Keyword Associated Keyword to Select or
Parameter to Type
Description
Traffic meter configuration
enable Y or N Enables or disables the traffic meter.
limit_type Nolimit, Downloadonly, or
BothDirections
The type of traffic limit, if any:
• Nolimit. There is no traffic limit.
• Downloadonly. The traffic limit
applies to downloaded traffic only.
• BothDirections. The traffic limit
applies to both downloaded and
uploaded traffic.
monthly_limit number The monthly limit for the traffic meter
in MB.
increase_limit_enable Y or N Enables or disables automatic
increase of the limit after the meter
has exceeded the configured limit.
increase_limit_by number The number in MB to increase the
configured limit of the traffic meter.
Traffic counter configuration
counter SpecificTime or RestartCounter Specifies how the traffic counter is
restarted:
• SpecificTime. Restarts the traffic
counter on a specific day and time.
You need to set the
day_of_month, time_hour,
time_meridian, and
time_minute keywords and
associated parameters.
• RestartCounter. Restarts the traffic
counter when you specify the
counter keyword and the
RestartCounter associated
keyword.
day_of_month day The day in the format DD (01 to 31)
that the traffic counter restarts. This
keyword applies only when you have
set the counter keyword to
SpecificTime.