User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
System Mode Configuration Commands
151
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Time Zone Command
system time configure
This command configures the system time, date, and NTP servers. After you have issued the
system time configure command, you enter the system-config [time] mode, and then
you can configure one keyword and associated parameter or associated keyword at a time in
the order that you prefer.
Step 1 Format system time configure
Mode system
Step 2 Format timezone <timezone>
auto_daylight {Y | N}
resolve_ipv6_address {Y | N}
use_default_servers {Y | N}
configure_ntp_servers {Y | N {ntp_server1 {<ipaddress> |
<domain name>}} {ntp_server2 {<ipaddress> | <domain name>}}}
Mode system-config [time]
Keyword Associated Keyword to
Select or Parameter to Type
Description
timezone timezone keyword For a list of time zones that you can enter,
see Table 12.
auto_daylight Y or N Specifies whether or not the wireless VPN
firewall automatically adjusts for daylight savings
time.
resolve_ipv6_address Y or N Specifies whether or not the wireless VPN
firewall automatically resolves a domain name for
an NTP server to an IPv6 address:
• Y. A domain name is resolved to an IPv6
address.
• N. A domain name is resolved to an IPv4
address.
use_default_servers Y or N Enables or disables the use of default NTP
servers.
configure_ntp_servers Y or N Enables or disables the use of custom NTP
servers. If you enable the use of custom NTP
servers, you need to specify the server IP
addresses or domain names with the
ntp_server1 and ntp_server2 keywords.
ntp_server1 ipaddress or domain name The IP address of domain name of the first
custom NTP server.
ntp_server2 ipaddress or domain name The IP address of domain name of the second
custom NTP server.