User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Security Mode Configuration Commands
137
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
security bandwidth profile edit <row id>
This command configures an existing bandwidth profile. After you have issued the security
bandwidth profile edit command to specify the row to be edited, you enter the
security-config [bandwidth-profile] mode, and then you can configure one keyword and
associated parameter or associated keyword at a time in the order that you prefer.s
Related show command: show security bandwidth profile setup
Step 1 Format security bandwidth profile edit <row id>
Mode security
Step 2 Format name <profile name>
direction {Inbound | Outbound | Both _Directions}
inbound_minimum_rate <kbps>
inbound_maximum_rate <kbps>
outbound_minimum_rate <kbps>
outbound_maximum_rate <kbps>
is_group {Individual | Group}
Mode security-config [bandwidth-profile]
Keyword Associated Keyword to
Select or Parameter to Type
Description
name profile name The profile name (alphanumeric string).
direction Inbound, Outbound, or
Both_Directions
The direction to which the bandwidth profile
applies.
inbound_minimum_rate kbps The minimum inbound bandwidth in kbps (0 to
100000) provided to the group or individual user.
inbound_maximum_rate kbps The maximum inbound bandwidth in kbps (110 to
100000) provided to the group or individual user.
outbound_minimum_rate kbps The minimum outbound bandwidth in kbps (0 to
100000) provided to the group or individual user.
outbound_maximum_rate kbps The maximum outbound bandwidth in kbps (110
to 100000) provided to the group or individual
user.
is_group Individual or Group The type for the bandwidth profile:
• Individual. The profile applies to an individual
user.
• Group. The profile applies to a group.