User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Security Mode Configuration Commands
135
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N>
security upnp configure
security-config[upnp]>
enable Y
security-config[upnp]>
advertisement period 60
security-config[upnp]>
advertisement time_to_live 6
security-config[upnp]>
save
Related show command: show security upnp setup and show security upnp portmap
Bandwidth Profile Commands
security bandwidth profile add
This command configures a new bandwidth profile. After you have issued the security
bandwidth profile add command, you enter the security-config [bandwidth-profile]
mode, and then you can configure one keyword and associated parameter or associated
keyword at a time in the order that you prefer.
Step 1 Format security upnp configure
Mode security
Step 2 Format enable {Y | N}
advertisement period <seconds>
advertisement time_to_live <seconds>
Mode security-config [upnp]
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description
enable Y or N Enables or disables UPnP.
advertisement period seconds The advertisement period in seconds,
from 1 to 86400 seconds.
advertisement time_to_live seconds The advertisement time-to-live period in
seconds, from 1 to 255 seconds.
Step 1 Format security bandwidth profile add
Mode security