User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Security Mode Configuration Commands
131
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Related show command: show security address_filter ip_or_mac_binding setup
security address_filter ip_or_mac_binding delete <row id>
This command deletes an IP/MAC binding rule by deleting its row ID.
Related show command: show security address_filter ip_or_mac_binding setup
security address_filter ip_or_mac_binding enable_email_log <ip version>
This command configures the email log for IP/MAC binding violations. After you have issued
the security address_filter ip_or_mac_binding enable_email_log command
to specify the IP version (IPv4 or IPv6), you enter the security-config [ip-or-mac-binding]
mode, and then you can configure the email log setting.
ip_version IPv4 or IPv6 Specifies the type of IP address to which the
IP/MAC binding rule is applied:
• IPv4. You need to issue the ip_address
keyword and specify an IPv4 address.
• IPv6. You need to issue the ip_address6
keyword and specify an IPv6 address.
ip_address ipaddress The IPv4 address to which the IP/MAC binding
rule is applied.
ip_address6 ipv6-address The IPv6 address to which the IP/MAC binding
rule is applied.
log_dropped_packets Y or N Enables or disables logging for the IP/MAC
binding rule.
Format security address_filter ip_or_mac_binding delete <row id>
Mode security
Step 1 Format security address_filter ip_or_mac_binding enable_email_log
Mode security
Step 2 Format enable_email_logs {Y | N}
Mode security-config [ip-or-mac-binding]
Keyword Associated Keyword to
Select or Parameter to Type
Description