User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Introduction
13
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Save Commands
The following table describes the configuration commands that let you save or cancel
configuration changes in the CLI. You can use these commands in any of the five main
configuration modes. These commands are not preceded by a period.
Commands That Require Saving
After you have issued a command that includes the word configure, add, or edit, you
enter a configuration mode from which you can issue keywords and associated parameters.
VPN configuration commands
vpn ipsec IKE policies
VPN policies
VPN IPSec Wizard
Mode Config records
VPN > IPSec VPN
l2tp L2TP server VPN > L2TP Server
radius RADIUS servers for VPN VPN > IPSec VPN > RADIUS Client
sslvpn SSL policies
Resources
Portal layouts
SSL VPN Client
Client routes
Port forwarding
VPN > SSL VPN
User accounts
User login and IP policies
Groups
Domains
Users
Table 4. Save commands
Command Description
save Save the configuration changes.
exit Save the configuration changes and exit the current configuration mode.
cancel Roll back the configuration changes.
Table 3. Main configuration modes (continued)
__________________________CLI________________________ ___Web Management Interface (GUI)___
Main Mode Submode Feature That You Can Configure Basic Path