User's Manual

Security Mode Configuration Commands
128
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Address Filter and IP/MAC Binding Commands
security address_filter mac_filter configure
This command configures the source MAC address filter. After you have issued the
security address_filter mac_filter configure command, you enter the
security-config [mac-filter] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Command example:
FVS318N> security address_filter mac_filter configure
security-config[mac-filter]> enable Y
security-config[mac-filter]> policy Block-And-Permit-Rest
security-config[mac-filter]> save
Related show command: show security address_filter mac_filter setup
security address_filter mac_filter source add
This command adds a new MAC address to the MAC address table for the source MAC
address filter. After you have issued the security address_filter mac_filter
source add command, you enter the security-config [mac-filter-source] mode, and then you
can add a MAC address.
Step 1 Format security address_filter mac_filter configure
Mode security
Step 2 Format enable {N | Y {policy {Permit-And-Block-Rest |
Block-And-Permit-Rest}}
Mode security-config [mac-filter]
Keyword Associated Keyword to
Select or Parameter to Type
Description
enable Y or N Enables or disables the source MAC address filter.
policy Permit-And-Block-Rest
or
Block-And-Permit-Rest
Sets the policy of the source MAC address filter.
Step 1 Format security address_filter mac_filter source add
Mode security
Step 2 Format address <mac address>
Mode security-config [mac-filter-source]