User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Security Mode Configuration Commands
127
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N>
security firewall session_settings configure
security-config[session-settings]>
tcp_session_timeout 3600
security-config[session-settings]>
udp_session_timeout 180
security-config[session-settings]>
icmp_session_timeout 120
security-config[session-settings]>
save
Related show command: show security firewall session_settings
security firewall advanced algs
This command configures Session Initiation Protocol (SIP) support for the application level
gateway (ALG). After you have issued the security firewall advanced algs
command, you enter the security-config [firewall-alg] mode, and then you can configure SIP
support.
Related show command: show security firewall advanced algs
Step 2 Format tcp_session_timeout <seconds>
udp_session_timeout <seconds>
icmp_session_timeout <seconds>
Mode security-config [session-settings]
Keyword Associated Parameter
to Type
Description
tcp_session_timeout seconds Configures the TCP session timeout period (integer) in
seconds.
udp_session_timeout seconds Configures the UDP session timeout period (integer) in
seconds.
icmp_session_timeout seconds Configures the ICMP session timeout period (integer) in
seconds.
Step 1 Format security firewall advanced algs
Mode security
Step 2 Format sip {Y | N}
Mode security-config [firewall-alg]
Keyword Associated Keyword
to Select
Description
Sip Y or N Enables or disables SIP for the ALG.