User's Manual

Security Mode Configuration Commands
125
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Related show command: show security firewall attack_checks vpn_passthrough setup
security firewall attack_checks configure ipv6
This command configures ipv6 WAN security attack checks. After you have issued the
security firewall attack_checks configure ipv6 command, you enter the
security-config [attack-checks-ipv6] mode, and then you can edit one keyword and
associated parameter or associated keyword at a time in the order that you prefer.
Command example:
FVS318N> security firewall attack_checks configure ipv6
security-config[attack-checks-ipv6]> respond_to_ping_on_internet_ports N
security-config[attack-checks-ipv6]> vpn_ipsec_passthrough Y
security-config[attack-checks-ipv6]> save
Related show command: show security firewall attack_checks setup ipv4
Session Limit, Time-Out, and Advanced Commands
security firewall session_limit configure
This command configures global session limits. After you have issued the security
firewall session_limit configure command, you enter the
security-config [session-limit] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Step 1 Format security firewall attack_checks configure ipv6
Mode security
Step 2 Format respond_to_ping_on_internet_ports {Y | N}
vpn_ipsec_passthrough {Y | N}
Mode security-config [attack-checks-ipv6]
Keyword Associated Keyword
to Select
Description
respond_to_ping_on_internet_ports Y or N Enables or disables the response to a
ping from the WAN port.
vpn_ipsec_passthrough Y or N Enables or disables IPSec VPN traffic
that is initiated from the LAN to reach the
WAN, irrespective of the default firewall
outbound policy and custom firewall
rules.