User's Manual

Security Mode Configuration Commands
124
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
security firewall attack_checks jumboframe setup
This command enables or disables jumbo frames for IPv4 traffic. After you have issued the
security firewall attack_checks jumboframe setup command, you enter the
security-advanced-config [jumbo-frame] mode, and then you can enable or disable jumbo
frames.
Related show command: show security firewall attack_checks jumboframe
security firewall attack_checks vpn_passthrough configure
This command configures VPN pass-through for IPv4 traffic. After you have issued the
security firewall attack_checks vpn_passthrough configure command, you
enter the security-config [vpn-passthrough] mode, and then you can configure one keyword
and associated parameter or associated keyword at a time in the order that you prefer.
Command example:
FVS318N> security firewall attack_checks vpn_passthrough configure
security-config[vpn-passthrough]> ipsec_enable Y
security-config[vpn-passthrough]> l2tp_enable Y
security-config[vpn-passthrough]> pptp_enable N
security-config[vpn-passthrough]> save
Step 1 Format security firewall attack_checks jumboframe setup
Mode security
Step 2 Format enable_jumboframe {Y | N}
Mode security-advanced-config [jumbo-frame]
Step 1 Format security firewall attack_checks vpn_passthrough configure
Mode security
Step 2 Format ipsec_enable {Y | N}
l2tp_enable {Y | N}
pptp_enable {Y | N}
Mode security-config [vpn-passthrough]
Keyword Associated Keyword
to Select
Description
ipsec_enable Y or N Enables or disables IPSec pass-through.
l2tp_enable Y or N Enables or disables L2TP pass-through.
pptp_enable Y or N Enables or disables PPTP pass-through.