User's Manual

Security Mode Configuration Commands
123
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N> security firewall attack_checks configure ipv4
security-config[attack-checks-ipv4]> respond_to_ping_on_internet_ports N
security-config[attack-checks-ipv4]> enable_stealth_mode Y
security-config[attack-checks-ipv4]> block_tcp_flood Y
security-config[attack-checks-ipv4]> block_udp_flood N
security-config[attack-checks-ipv4]> disable_ping_reply_on_lan Y
security-config[attack-checks-ipv4]> save
Related show command: show security firewall attack_checks setup ipv4
security firewall attack_checks igmp setup
This command enables or disables multicast pass-through by enabling or disabling the IGMP
proxy for IPv4 traffic. After you have issued the security firewall attack_checks
igmp setup command, you enter the security-advanced-config [igmp] mode, and then you
can enable or disable the IGMP proxy.
Related show command: show security firewall attack_checks igmp
Keyword Associated Keyword
to Select
Description
WAN security checks
respond_to_ping_on_internet_ports Y or N Enables or disables the response to a
ping from the WAN port.
enable_stealth_mode Y or N Enables or disables stealth mode.
block_tcp_flood Y or N Blocks or allows TCP floods on the WAN
port.
LAN security checks
block_udp_flood Y or N Blocks or allows UDP floods on LAN
ports.
disable_ping_reply_on_lan Y or N Enables or disables ping replies from
LAN ports.
Step 1 Format security firewall attack_checks igmp setup
Mode security
Step 2 Format enable_igmp_proxy {Y | N}
Mode security-advanced-config [igmp]