User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Introduction
12
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Security configuration commands
security address_filter Source MAC filters
IP/MAC bindings for IPv4
IP MAC bindings for IPv6
Security > Address Filter
bandwidth Bandwidth profiles Security > Bandwidth Profile
content_filter Blocked keywords
Trusted domains
Group filtering
Security > Content Filtering
firewall All IPv4 firewall rules
All IPv6 firewall rules
Attack checks
Session limits and time-outs
SIP ALG
Security > Firewall
porttriggering_rules Security > Port Triggering
schedules Security > Schedule
services Security > Services
upnp Security > UPnP
Administration and monitoring configuration commands
system logging Monitoring > Firewall Logs & E-mail
remote_management Administration > Remote Management
snmp Administration > SNMP
time Administration > Time Zone
traffic_meter Monitoring > Traffic Meter
Wireless configuration commands
dot11 profile Wireless profiles Network Configuration > Wireless Settings
radio Wireless radio Network Configuration > Wireless Settings
Table 3. Main configuration modes (continued)
__________________________CLI________________________ ___Web Management Interface (GUI)___
Main Mode Submode Feature That You Can Configure Basic Path