User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Introduction
11
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
The Five Main Modes for Configuration Commands
For the configuration commands, there are five main modes in the CLI: net, security, system,
dot11, and vpn. Chapter 2, Overview of the Configuration Commands lists all commands in
these modes, and each of these modes is described in detail in a separate chapter (see
Chapter 3 through Chapter 7).
The following table lists the main configuration modes, the configuration modes, the features
that you can configure in each configuration mode, and, for orientation, the basic web
management interface (GUI) path to the feature.
Table 3. Main configuration modes
__________________________CLI________________________ ___Web Management Interface (GUI)___
Main Mode Submode Feature That You Can Configure Basic Path
Network configuration commands
net ddns Dynamic DNS Network Configuration > Dynamic DNS
dmz DMZ for IPv4
DMZ for IPv6
Network Configuration > DMZ Setup
ethernet VLAN assignment to LAN interface Network Configuration > LAN Setup
ipv6 IPv4 or IPv4/IPv6 mode Network Configuration > WAN Settings
ipv6_tunnel IPv6 tunnels Network Configuration > WAN Settings
lan IPv4 LAN settings and VLANs
LAN groups for IPv4
Secondary IPv4 addresses
Advanced IPv4 LAN settings
IPv6 LAN settings
Secondary IPv6 addresses
IPv6 LAN DHCP address pools
Network Configuration > LAN Setup
radvd IPv6 RADVD and pools for the LAN
IPv6 RADVD and pools for the DMZ
Network Configuration > LAN Setup
Network Configuration > DMZ Setup
routing Dynamic IPv4 routes
Static IPv4 routes
Static IPv6 routes
Network Configuration > Routing
wan IPv4 WAN (Internet) settings
IPv6 WAN (Internet) settings
MTU, port speed, and MAC
address
Network Configuration > WAN Settings
wan_settings NAT or Classical Routing Network Configuration > WAN Settings