User's Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
3-8 Protecting Your Network
1. Log in to the firewall at its default LAN address of http://192.168.0.1 with its default User
Name of
admin, default password of password, or using whatever User Name, Password and
LAN address you have chosen for the firewall.
2. Click on the Schedule link of the Security menu to display menu shown below.
Figure 3-6: Schedule Services menu
3. Select your Time Zone. This setting will be used for the blocking schedule according to your
local time zone and for time-stamping log entries.
Check the Daylight Savings Time box if your time zone is currently in daylight savings time.
Note: If your region uses Daylight Savings Time, you must manually check Adjust for
Daylight Savings Time on the first day of Daylight Savings Time, and uncheck it at the end.
Enabling Daylight Savings Time will cause one hour to be added to the standard time.
4. The firewall has a list of publicly available NTP servers. If you would prefer to use a particular
NTP server as the primary server, enter its IP address under Use this NTP Server.
5. Click Apply to save your settings.
FVM318.book Page 8 Wednesday, September 18, 2002 5:20 PM