User's Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
3-2 Protecting Your Network
Procedure 3-1: Changing the Built-In Password
1. Log in to the firewall at its default LAN address of http://192.168.0.1 with its default User
Name of
admin, default password of password, or using whatever User Name, Password and
LAN address you have chosen for the firewall.
Figure 3-1: Log in to the firewall
2. From the Main Menu of the browser interface, under the Maintenance heading, select Set
Password to bring up the menu shown in
Figure 3-2.
Figure 3-2: Set Password menu
3. To change the password, first enter the old password, and then enter the new password twice.
4. Click Apply to save your changes.
Note: After changing the password, you will be required to log in again to continue the
configuration.
If you have backed up the firewall settings previously, you should do a new
backup so that the saved settings file includes the new password.
FVM318.book Page 2 Wednesday, September 18, 2002 5:20 PM