User's Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
2-18 Connecting the Firewall to the Internet
2. Configure the Serial Port of the Firewall.
Note: To connect to the firewall, your computer needs to be configured to obtain an IP address
automatically via DHCP. If you need instructions on how to do this, please refer to
Appendix C, "Preparing Your Network".
a. Use a browser to log in to the firewall at http://192.168.0.1 with its default User Name of
admin and default Password of password, or using whatever User Name, Password you
have set up.
Note: The user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
b. From the Setup menu, click the Serial Port link to display the menu below.
Figure 2-13: Setup Serial Port configuration menu
FVM318.book Page 18 Wednesday, September 18, 2002 5:20 PM