Quick Reference Guide

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
3-14 Wireless Configuration
d. Click Add to display the IPSec client setting menu, as shown below.
Figure 3-14. IPSec Client Settings menu
e. Enter a descriptive name for this PC in Connection Name. This name is for your
convenience only, and is not used in the VPN negotiation.
f. Enter the user name. An email address is an easy to remember user name.
g. Enter a Pre-Shared Key value for this connection.
h. Use the default Aggressive Mode and AES - 256 settings.
2. Install the SafeNet SoftRemote Basic VPN client software.
a. Place the FVM318 Resource CD in your CD drive.
If the CD does not autostart, double click on the INDEX.HTM file on the CD.
b. Install the SafeNet SoftRemote Basic VPN client.
After installation, a SafeNet icon shown below will appear in the taskbar tray of your PC.
Figure 3-15. SafeNet system tray icon with disabled indicator
Note: Before installing the SafeNet SoftRemote Basic VPN Client software, be sure to
turn off any virus protection or firewall software you may be running on your PC.