Quick Reference Guide

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
1-6 Introduction
You can use some of the LEDs to identify the status of the firewall and verify connections.
Table 1-1 describes each LED on the front panel of the firewall.
These LEDs are green when lit, except for the TEST LED, which is amber.
Table 1-1: LED Descriptions
Label Activity Description
POWER On Power is supplied to the firewall.
TEST On
Off
The system is initializing.
The system is ready and running.
INTERNET
LINK On The port detected a link with the Internet WAN connection.
ACT On/Blinking Blinking indicates data transmission.
WLAN On The wireless interface is enabled.
LOCAL
100 On
Off
The Local port is operating at 100 Mbps.
Indicates data transmission at 10 Mbps.
LINK/ACT On/Blinking The Local port has detected a link with a LAN connection.
Blinking indicates data transmission.