Quick Reference Guide

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
5-16 Protecting Your Network
May 2004, 202-10030-02
• Send alerts and logs by e-mail. If you enable e-mail notification, these boxes cannot be
blank.
• Enter the e-mail address to which logs and alerts will be sent. This e-mail address will also
be used as the From address. If you leave this box blank, log and alert messages will not
be sent via e-mail.
– If you wish to set the From E-mail address used by this mail, or your SMTP server
requires you to login before you can send mail, click the Advanced button and
configure the Advanced E-mail screen.
Figure 5-11: Advanced E-mail
– Check “My Mail Server requires authentication” if you need to log in to your SMTP
server in order to send e-mail. If this is checked, you must enter the login name and
password for your mail server.
• Enter the name or IP address of your ISP’s outgoing (SMTP) mail server (such as
mail.myISP.com). You may be able to find this information in the configuration menu of
your e-mail program.
Tip: You used this information when you set up your e-mail program. If you cannot
remember it, check the settings in your e-mail program.
• Send E-mail alerts immediately. You can specify that logs are immediately sent to the
specified e-mail address when any of the following events occur:
– If a Denial of Service attack is detected.
– If a Port Scan is detected.