Quick Reference Guide

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
4-10 WAN and LAN Configuration
May 2004, 202-10030-02
Port Triggering Rules
This table lists the current rules:
• Enable - Indicates if the rule is enabled or disabled. Generally, there is no need to disable a rule
unless it interferes with some other function, such as Port Forwarding.
• Name - The name for this rule.
• Outgoing Ports - The port or port range for outgoing traffic. An outgoing connection using one
of these ports will Trigger this rule.
• Incoming Ports - The port or port range used by the remote system when it responds to the
outgoing request. A response using one of these ports will be forwarded to the PC which
triggered this rule.
Adding a new Rule
Figure 4-4: Port Trigger Add
To add a new rule, click the Add and enter the following data on the resulting screen.
• Name - enter a suitable name for this rule (e.g. the name of the application)
• Enable/Disable - select the desired option.
• Outgoing (Trigger) Port Range - enter the range of port numbers used by the application when
it generates an outgoing request.