Quick Reference Guide

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVL328 H-11
May 2004, 202-10030-02
Figure H-11: NETGEAR FVL328 VPN – Auto Policy (part 2)
– From the Traffic Selector Remote IP drop-down box, select Subnet address.
– Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Remote
IP Start IP Address field.
– Type the finishing LAN IP Address of Gateway A (0.0.0.0 in our example) in the Remote
IP Finish IP Address field.
– Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Remote
IP Subnet Mask field.
– From the AH Configuration Authentication Algorithm drop-down box, select MD5.
– Select the Enable Encryption check box.
– From the ESP Configuration Encryption Algorithm drop-down box, select 3DES.
– Select the Enable Authentication check box.
– From the ESP Configuration Authentication Algorithm drop-down box, select MD5.
– Select the NETBIOS Enable check box.
5. Click the Apply Button. You will be taken back to the VPN Policies Menu page.