Quick Reference Guide

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVL328 H-5
May 2004, 202-10030-02
Figure H-4: NETGEAR FVS318 VPN Settings (part 1) – Main Mode
– In the Connection Name box, enter in a unique name for the VPN tunnel to be configured
between the NETGEAR devices. For this example we have used toFVL328.
– Enter a Local IPSec Identifier name for the NETGEAR FVS318 Gateway A. This name
must be entered in the other endpoint as Remote IPSec Identifier. In this example we used
netgear.dyndns.org (the FQDN) as the local identifier.
– Enter a Remote IPSec Identifier name for the remote NETGEAR FVL328 Gateway B.
This name must be entered in the other endpoint as Local IPSec Identifier. In this example
we used 22.23.24.25 as the remote identifier.
– Choose a subnet from local address from the Tunnel can be accessed from pull-down
menu.
– Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Local IP
Local LAN start IP Address field.
– Type the finishing LAN IP Address of Gateway A (0.0.0.0 in our example) in the Local IP
Local LAN finish IP Address field.
– Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Local
LAN IP Subnetmask field.
– Choose a subnet from local address from the Tunnel can access pull-down menu.