Quick Reference Guide

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router G-3
May 2004, 202-10030-02
2.
Click IKE Policies under the VPN menu and click Add on the IKE Policies Menu.
Figure G-2: NETGEAR FVL328 IKE Policy Configuration
– Enter a descriptive name for the policy in the Policy Name field. This name is not supplied
to the remote VPN endpoint. It is used to help you manage the IKE policies. In our
example, we used VPNclient as the Policy Name.
– From the Direction/Type drop-down box, select Remote Access.
– From the Exchange Mode drop-down box, select Aggressive Mode. This will also be
selected in the FVL328 Prosafe High Speed VPN Firewall My Identity ID Type fields, as
seen in “Security Policy” on page G-11.
– From the Local Identity drop-down box, select Fully Qualified Domain Name (the actual
WAN IP address of the FVL328 will also be used in the Connection ID Type fields of the
FVL328 Prosafe High Speed VPN Firewall as seen in “Security Policy Editor New
Connection” on page G-8).