Quick Reference Guide

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
Managing Your Network 7-11
May 2004, 202-10030-02
Click the “Show Statistics” button to display firewall usage statistics, as shown in Figure 7-6
below:
Figure 7-6. Router Statistics screen
This screen shows the following statistics:
IP Subnet Mask This field displays the IP Subnet Mask being used by the Local (LAN)
port of the firewall. The default is 255.255.255.
WAN Port These parameters apply to the Internet (WAN) port of the firewall.
Network Address
Translation (NAT)
NAT allows all LAN computers to gain Internet access via this Router, by
sharing this Router's WAN IP address. You should only turn NAT OFF if
you are sure you do not require it.
MAC Address This field displays the Ethernet MAC address being used by the Internet
(WAN) port of the firewall.
IP Address This field displays the IP address being used by the Internet (WAN) port
of the firewall. If no address is shown, the firewall cannot connect to the
Internet.
DHCP If set to None, the firewall is configured to use a fixed IP address on the
WAN.
If set to Client, the firewall is configured to obtain an IP address
dynamically from the ISP
IP Subnet Mask This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the firewall.
Domain Name Server (DNS) This field displays the DNS Server IP addresses being used by the
firewall. These addresses are usually obtained dynamically from the ISP.
Table 7-1. Router Status Fields
Field Description