Quick Reference Guide

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
7-4 Managing Your Network
May 2004, 202-10030-02
• Restart traffic counter—This determines when the traffic counter restarts. Choose the desired
time and day of the month.
• Restart Counter Now—Click this button to restart the Traffic Counter immediately.
• Send E-mail Report before restarting counter—If checked, an E-mail report will be sent
immediately before restarting the counter. You must configure the E-mail screen in order for
this function to work.
Enable Monthly Limit
Use this if your ISP charges for additional traffic. If enabled, enter the monthly volume limit and
select the desired behavior when the limit is reached.
Note: Both incoming and outgoing traffic are included in the limit.
• Increase this month's limit—Use this to temporarily increase the Traffic Limit if you have
reached the monthly limit, but need to continue accessing the Internet. Check the checkbox
and enter the desired increase. (The checkbox will automatically be cleared when saved so the
increase is only applied once.)
• This month's limit displays the limit for the current month.
• When limit is reached, select the desired option:
• Block all traffic - all access to and from the Internet will be blocked.
• Block all traffic except E-mail - Only E-mail traffic will be allowed. All other traffic will
be blocked.
If using this option, you may also select the Send E-mail alert option. You must configure
the E-mail screen in order for this function to work.
Internet Traffic Statistics
This displays statistics on Internet Traffic via the WAN port. If you have not enabled the Traffic
Meter, these statistics are not available.
Note: Enter a Monthly Limit if Traffic Limit is enabled; otherwise, the default limit is
0 MB and there will be no Internet access allowed.