Quick Start Manual

Introduction

FS752TP Smart Switch

Features

The following list identifies the key features supported by the FS752TP:

• The 10/100/1000 Base-T ports are auto-sensing using RJ-45 UTP connectors.

• Auto MDI/MDI-X sensing and auto-negotiation is supported on all ports.

• Full-duplex flow control.

• Half-duplex back pressure control.

• Head-of-line blocking prevention .

• MAC aging.

• Static MAC addresses entry and dynamic MAC addresses learning.

• VLANs

• IEEE 802.1Q up to 128 VLAN entries.

• Protected ports functionality which is similar to Port based VLANs.

• 802.3ad Link Aggregation.

• Setting LAGs manually or dynamically using LACP.

• Auto-Voice VLAN.

• Port mirroring (many to one), including the ability to Mirror RX, TX, or both.

• CoS and QoS.

• Broadcast, Multicast, and Unknown Unicast storm protection by specifying the threshold

as a percentage of port-speed.

• Spanning Tree (IEEE 802.1d).

• IEEE 802.1s MSTP and IEEE 802.1w, Rapid Reconfiguration Spanning Tree.

• L4 QoS ACL.

• Policy-based DiffServ.

• NETGEAR Green product series power-saving features:

• Per port automatic power down when the port link is down.