User Manual
Table Of Contents
- FS728TP Smart Switch
- Table of Contents
- 1. Getting Started
- Getting Started with the FS728TP Smart Switch
- Switch Management Interface
- Connecting the Switch to the Network
- Switch Discovery in a Network with a DHCP Server
- Switch Discovery in a Network without a DHCP Server
- Configuring the Network Settings on the Administrative System
- Web Access
- Smart Control Center Utilities
- Understanding the User Interfaces
- Interface Naming Convention
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Configuring Quality of Service
- 5. Managing Device Security
- 6. Monitoring the System
- 7. Maintenance
- 8. Help
- A. Hardware Specifications and Default Values
- B. Configuration Examples
- C. Notification of Compliance
- Index
Appendix A: Hardware Specifications and Default Values | 232
A. Hardware Specifications and Default
Values
A
FS728TP Smart Switch Specifications
The FS728TP Smart Switch conforms to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, IEEE
802.1D, IEEE 802.1p, and IEEE 802.1Q standards.
Feature Value
Interfaces 24 10/100 Ethernet ports
Two 10/100/1000M Gigabit Ethernet (RJ-45) ports
Two 1000M Gigabit Ethernet combo ports
RJ-45 supports auto sensing for 10/100/1000M speed on RJ45
and 1000M on SFP1000M SFP Gigabit Ethernet ports
PoE Ports 1–24, IEEE 802.3af, Alternative A (MDI-X)
Flash memory size 16 MB
SRAM size and type 64 MB DDR
Feature Value
Switching capacity Non-Blocking Full WireSpeed on all packet sizes
Forwarding method Store and Forward
Packet forwarding rate 10M:14,880 pps/
100M:148,810 pps/
1G:1,488,000 pps
MAC addresses 4K
Green Ethernet Automatic power down on port when link is down