User Manual
Table Of Contents
- FS728TP Smart Switch
- Table of Contents
- 1. Getting Started
- Getting Started with the FS728TP Smart Switch
- Switch Management Interface
- Connecting the Switch to the Network
- Switch Discovery in a Network with a DHCP Server
- Switch Discovery in a Network without a DHCP Server
- Configuring the Network Settings on the Administrative System
- Web Access
- Smart Control Center Utilities
- Understanding the User Interfaces
- Interface Naming Convention
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Configuring Quality of Service
- 5. Managing Device Security
- 6. Monitoring the System
- 7. Maintenance
- 8. Help
- A. Hardware Specifications and Default Values
- B. Configuration Examples
- C. Notification of Compliance
- Index
Chapter 5: Managing Device Security | 187
FS728TP Smart Switch Software Administration Manual
IP Binding Table
Use the IP Binding Table page to view or delete the IP ACL bindings.
To display the IP Binding Table, click Security ACL, then click the Advanced Binding
Table link
The following table describes the information displayed in the MAC Binding Table.
To delete an IP ACL-to-interface binding, select the check box next to the interface and click
Delete.
Field Description
Interface Displays the interface to which the IP ACL is bound.
Direction Specifies the packet filtering direction for ACL. The only valid direction is
Inbound, which means the IP ACL rules are applied to traffic entering the
port.
ACL Type Displays the type of ACL assigned to selected interface and direction.
ACL ID Displays the ACL Number identifying the ACL assigned to selected interface
and direction.
Seq No. Displays the Sequence Number signifying the order of specified ACL relative
to other ACLs assigned to selected interface and direction.