User Manual
Table Of Contents
- FS728TP Smart Switch
- Table of Contents
- 1. Getting Started
- Getting Started with the FS728TP Smart Switch
- Switch Management Interface
- Connecting the Switch to the Network
- Switch Discovery in a Network with a DHCP Server
- Switch Discovery in a Network without a DHCP Server
- Configuring the Network Settings on the Administrative System
- Web Access
- Smart Control Center Utilities
- Understanding the User Interfaces
- Interface Naming Convention
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Configuring Quality of Service
- 5. Managing Device Security
- 6. Monitoring the System
- 7. Maintenance
- 8. Help
- A. Hardware Specifications and Default Values
- B. Configuration Examples
- C. Notification of Compliance
- Index
162 | Chapter 5: Managing Device Security
FS728TP Smart Switch Software Administration Manual
To configure 802.1X settings for the port:
1. Select the check box next to the port to configure. You can also select multiple check
boxes to apply the same settings to the selected ports, or select the check box in the
heading row to apply the same settings to all ports.
2. For the selected port(s), specify the following settings:
• Port Control. Defines the port authorization state. The control mode is only set if the
link status of the port is link up. The possible field values are:
• Auto: Automatically detects the mode of the interface.