Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Overview
- 2. Get started
- 3. Extender Network Settings
- Enable or disable One WiFi Name
- Enable or disable smart connect
- View connected devices
- View WiFi settings
- Change the WiFi network name
- Turn off the SSID broadcast to create a hidden network
- Disable or enable the WiFi radios
- Change the WiFi speed
- Use WPS to add a computer to the extender’s WiFi network
- Deny access to a computer or WiFi device
- Set up an access schedule
- Change the extender’s device name
- Set up the extender to use a static IP address
- Configure a router with advanced MAC settings to work with your extender
- Boost your video streaming with FastLane technology
- Enable or disable 20/40 MHz coexistence
- 4. Maintain and monitor the extender
- Change the extender login user name and password
- Turn password protection off and on
- Recover a forgotten user name or password
- Automatically adjust for daylight saving time
- Manually set the extender clock
- Back up and manage the extender configuration
- Return the extender to its factory default settings
- Update the extender firmware
- Restart the extender from the extender web interface
- 5. FAQs and troubleshooting
- 6. Supplemental information
- Quick Start
I enabled a WiFi MAC filter, wireless access control, or access
control list
(ACL)
on
my router. What should I do when installing
the
extender?
When a device connects through
the
extender
to
your
router,
the
MAC
address
of
the
device shown on
the
router
is
translated
to
another MAC
address.
If
your
router's MAC filter, wireless access control,
or
ACL
is
enabled,
the
device connects
to
the
extender
but
cannot
get
an
I P address
from
the
extender and cannot access
the
Internet.
To
allow
your
device
to
receive
an
IP
address
from
the
extender and access
the
Internet, you must provide
the
translated MAC address
to
the
router.
1.
Log
in
to
your
router and disable
the
MAC filter, wireless access
control,
or
ACL.
For
more information about
how
to
disable
your
router's MAC filter,
wireless access control,
or
ACL,
see
your
router's documentation.
2.
Power
on
the
extender and connect
all
of
your
devices
to
the
extender network.
3.
Make sure
that
the
Router Link
LED
remains lit.
4.
Log
in
to
your
extender:
a.
Launch a web browser and
in
the
address field, enter
www
.mywifiext
.net.
A login page displays.
18