Owner's Manual
Table Of Contents
- Quick Start Guide
- Range Extender User Manual
- Table of Contents
- Overview
- Get Started
- Optimize Extender Performance
- Extender Network Settings
- View Connected Devices
- View WiFi Settings
- Change the WiFi Network Name
- Turn Off the SSID Broadcast to Create a Hidden Network
- Disable or Enable the WiFi Radios
- Change the WiFi Speed
- Use WPS to Add a Computer to the Extender’s WiFi Network
- Deny Access to a Computer or WiFi Device
- Set Up an Access Schedule
- Change the Extender’s Device Name
- Set Up the Extender to Use a Static IP Address
- Maintain and Monitor the Extender
- Change the Extender User Name and Password
- Turn Password Protection Off and On
- Recover a Forgotten User Name or Password
- Automatically Adjust for Daylight Saving Time
- Manually Set the Extender Clock
- Back Up and Manage the Extender Configuration
- Back Up the Configuration Settings
- Return the Extender to Its Factory Default Settings
- Update the Firmware
- Turn the NETGEAR Logo LED On or Off
- Restart the Extender Remotely
- Share a USB Storage Device
- Use the Extender as a Media Server
- Share a USB Printer Through the Extender
- FAQs and Troubleshooting
- Factory Settings and Technical Specifications
Share a USB Printer Through the Extender
65
AC1900 WiFi Range Extender
3. Click the Network Scanner button.
The scanner screen displays so that you can use the USB printer for scanning.
Change NETGEAR USB Control Center Settings
You can stop the NETGEAR USB Control Center from starting automatically when you log in
to Windows. You can also change the language and specify the time-out to release the
connection to the USB printer that is connected to the extender.
To turn off automatic NETGEAR USB Control Center startup:
1. Launch the NETGEAR USB Control Center
.
2. Select T
ools > Configuration.
3. Clear the Automatically execute when logging on W
indows check box.
4. Click the OK button.
Your settings are saved.