Owner's Manual
Table Of Contents
- Quick Start Guide
- Range Extender User Manual
- Table of Contents
- Overview
- Get Started
- Optimize Extender Performance
- Extender Network Settings
- View Connected Devices
- View WiFi Settings
- Change the WiFi Network Name
- Turn Off the SSID Broadcast to Create a Hidden Network
- Disable or Enable the WiFi Radios
- Change the WiFi Speed
- Use WPS to Add a Computer to the Extender’s WiFi Network
- Deny Access to a Computer or WiFi Device
- Set Up an Access Schedule
- Change the Extender’s Device Name
- Set Up the Extender to Use a Static IP Address
- Maintain and Monitor the Extender
- Change the Extender User Name and Password
- Turn Password Protection Off and On
- Recover a Forgotten User Name or Password
- Automatically Adjust for Daylight Saving Time
- Manually Set the Extender Clock
- Back Up and Manage the Extender Configuration
- Back Up the Configuration Settings
- Return the Extender to Its Factory Default Settings
- Update the Firmware
- Turn the NETGEAR Logo LED On or Off
- Restart the Extender Remotely
- Share a USB Storage Device
- Use the Extender as a Media Server
- Share a USB Printer Through the Extender
- FAQs and Troubleshooting
- Factory Settings and Technical Specifications
Overview
10
AC1900 WiFi Range Extender
Attach the Rubber Feet
If you prefer to place the extender in horizontal position, you can attach the rubber feet that
come with the extender.
To attach the rubber feet:
1. Place the extender upside down, with the red panel facing you.
The red panel is the bottom.
2. In each corner, attach a rubber foot in such a way that it covers the triangle.
Attach the Antennas
To attach the antennas:
1. Align the antennas with the antenna posts on the extender.
2. Attach the antennas on the threaded antenna posts.
3. Position the antennas for the best WiFi performance.