Owner's Manual
Table Of Contents
- User Manual
- Reset
- Table of Contents
- Get to Know Your Extender
- Get Started
- Use the Extender in Extender Mode
- Access Extender Settings
- Extender Network Settings
- View Connected Devices
- Deny Access to a WiFi Device
- Set Up an Access Schedule
- Monitor and Maintain the Extender
- Change the Extender User Name and Password
- Turn Password Protection Off and On
- FAQs and Troubleshooting
- Factory Default Settings
- Specs
- Quick Start
- Data Sheet
Extender Network Settings
29
AC1200 WiF Range Extender
Use WPS With the PIN Method
To use the PIN method to connect a WiFi-enabled computer or mobile device to the
extender’s WiFi network, you must know the PIN of the WiFi-enabled computer or mobile
device that you are trying to connect.
To use a WPS PIN to connect to the extender’s WiFi network:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser
.
3. Enter www
.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Do More > Connect Devices (WPS).
The Connect Devices (WPS) page displays.
6. Select the PIN Number radio button.
7. Type the PIN of the WiFi-enabled computer or mobile device in the field.
8. Click the NEXT button.
For four minutes, the extender attempts to find the computer or WiFi-enabled computer or
mobile device.
9. Within four minutes, go to the WiFi-enabled computer or mobile device and use its WPS
software to join the WiFi network.
10. T
o verify that the WiFi-enabled computer or mobile device is connected to the extender’s
WiFi network, select
Settings > Connected Devices.
The WiFi-enabled computer or mobile device displays onscreen.