Installation Guide

Connect with NETGEAR genie Smart Setup

1. Make sure that the switch on the extender is set to Extender.

2. Use a WiFi network manager on a computer or mobile device to

find and connect to one of the extender WiFi networks.

The extender is dual band, so it has two WiFi networks:

• 2.4 GHz network. EX6100_NETGEAR_2GEXT

• 5 GHz network. EX6100_NETGEAR_5GEXT

After the connection with the computer or mobile device is

established, the Client Link LED lights solid green.

3. Open a web browser window from the same computer or mobile

device.

The browser takes you directly to the NETGEAR genie

smart

setup.

Note: If you are not automatically directed to NETGEAR genie,

launch a web browser and enter www.mywifiext.net in the

address field. Enter admin for the user name and password for

the password.