Quick Start Manual

Installation Guide for the Model EN516 Ethernet Hub
3-10 Installation
Connecting to Other NETGEAR Products
You can extend your network by connecting to an Ethernet switch, such as the NETGEAR Model
SW507 Ethernet Switch. Figure 3-7 illustrates power users on a 100 Mbps network using the
NETGEAR Model FE516 Fast Ethernet Hub and connecting to the 10 Mbps network through a
Model SW507 switch.
Key:
1 = Workstations 4 = Server
2 = 100 Mbps connection 5 = NETGEAR Model SW507 Ethernet switch
3 = NETGEAR Model FE516 Fast 6 = 10 Mbps connection Ethernet hub
Figure 3-7. Connecting multiple NETGEAR products
Note:
Ethernet specifications limit segments to 100 stations and 1,640 feet (500 m) in
length, and specify that the AUI cable between the hub and the transceiver is limited to
164 feet (50 m).
7228
Model EN516 hub Model EN516 hub Model EN516 hub
Model FE516 hub
Model SW507 switch
65421 3