Quick Start Manual

Model EN308
TC
Ethernet Hub Installation Guide
4. Connect the Hub to a Network
Cascading refers to connecting hubs together to increase the number of ports or
the number of users supported on the network. The 10BASE-T ports can be used
to cascade hubs together.
The twisted pair cable extended from a 10BASE-T port (or UTP port) is called a
twisted pair segment and can be up to 100 meters (m) in length. The 10BASE-T
ports, with the exception of port 8, are MDI-X (or Normal) ports. Use the
following table as a guide for selecting the appropriate network cable.
Set the Normal/Uplink Push Button
If you are connecting to port 8 on the Model EN308
TC
hub, use the following
table. Determine the type of cable to use and how to set the Normal/Uplink push
button.
Connecting Port
on the Hub
Connecting Device Cable Used
Ports 1–7 PC, server, or router Straight-through cable
Ports 1–7 Hub or switch Crossover cable
Connecting Port Connecting Device Cable Used
Port 8 set to Normal PC, server, or router Straight-through cable
Port 8 set to Uplink Hub or switch Straight-through cable
Connect the Hub to a Network