Quick Start Manual

Model EN104/EN108/EN116 Ethernet Hub Installation Guide
You can connect PCs, Apple Macintosh computers, UNIX workstations, or any
device equipped with a 10BASE-T Ethernet interface to the RJ-45 ports on your
hub by using twisted pair Ethernet cables.
To connect any of the RJ-45 ports on your hub to a PC, use a regular straight-
through UTP cable. If you are connecting using port 4 on the Model EN104 hub,
port 8 on the Model EN108 hub, or port 16 on the Model EN116 hub, set the
Normal/Uplink push button to Normal.
Note: Ethernet specifications limit the cable length between your PC
or server and the hub to 328 feet (100 meters) in length.
Connect a PC to the Hub
N
o
r
m
a
l
/
U
p
l
i
n
k
1
2
3
4
P
w
r
C
o
l
5
6
7
8
8734FA
(The Model EN108 hub is
shown in the illustration.)