Quick Start Manual

Model EN104/EN108/EN116 Ethernet Hub Installation Guide
Rear Panel
The rear panel of the hub has a BNC port that you can use to connect to a
backbone network or other PCs using thin coaxial cable.
The rear panel of the Model EN108 hub and the Model EN116 hub also has an
AUI port in addition to the BNC port. You can use the AUI port with the
appropriate transceiver to connect the hub to a backbone network using thin
coaxial cable, thick coaxial cable, fiber optic cable, or 10BASE-T wiring.
The rear panel also includes a DC power receptacle.
AUI
BNC
Active
12Vdc 1.2A
Rx
Active
Rx
— +
BNC
Active
12Vdc 1.2A
Rx
— +
8738FA
AUI port
Rear Panel of the Model EN104 hub
Rear Panel of the Model EN108 hub
Rear Panel of the Model EN116 hub
AUI port LEDs
BNC port
BNC port LEDs
Power receptacle
AUI
BNC
12Vdc 1.2A
— +
Active
Rx
Active
Rx