Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Overview
- 2. Get Started
- 3. Extender Network Settings
- Enable or disable One WiFi Name
- Enable or disable smart connect
- View connected devices
- View WiFi settings
- Change the WiFi network name
- Turn off the SSID broadcast to create a hidden network
- Disable or enable the WiFi radios
- Change the WiFi speed
- Use WPS to add a computer to the extender’s WiFi network
- Deny access to a computer or WiFi device
- Set up an access schedule
- Change the extender’s device name
- Set up the extender to use a static IP address
- Configure a router with advanced MAC settings to work with your extender
- 4. Maintain and Monitor the Extender
- Change the extender login user name and password
- Turn password protection off and on
- Recover a forgotten user name or password
- Automatically adjust for daylight saving time
- Manually set the extender clock
- Back up and manage the extender configuration
- Back up the configuration settings
- Return the extender to its factory default settings
- Update the extender firmware
- Restart the extender from the extender web interface
- Turn the LEDs On or Off
- Adjust the WiFi coverage
- 5. Share USB Storage Devices Attached to the Extender
- USB Device Requirements
- Connect a USB Storage Device to the Extender
- Access a Storage Device Connected to the Extender From a Windows Computer
- Map a USB Device to a Windows Network Drive
- Access a Storage Device That Is Connected to the Extender From a Mac
- Turn the USB Port Off and On
- Add a Network Folder on a USB Storage Device
- Password protect a folder on a USB storage device
- Change the Network or Device Name
- 6. Use the Extender as a Media Server
- 7. FAQs and troubleshooting
- 8. Supplemental Information
- Quick Start Guide
1. Press the WPS button on the extender until the WPS LED
blinks white.
2. Within two minutes, press the WPS button on your router.
When the extender connects to the router, the Router Link LED
lights.
If the Router Link LED lights white, the connection between your router
and extender is good. If the Router Link LED lights amber or red, move the
extender closer to the router and try again.
Note: If your router supports the 5 GHz band and your extender didn’t
connect to that band, repeat the WPS process.
3. Move your extender to a new location.
For more information, see
Find a good spot for your extender.
4. Connect your WiFi-enabled devices to the extended network.
For more information, see
Connect your device to the extended network.
Connect with WPS