Owner's Manual

Modem Internet Setup

Broadband ADSL2+ Modem DM111PSPv2

• WAN port settings. This is your port address type (PPPoE by default) and ISP login name

and password. See Manual Setup (Basic Settings) on page 21 for more information about

address types.

• Modem login. The modem administrator login name and password as described in Log In

to the Modem on page 17.

• System information. PC operating system, modem serial number, and WAN Port MAC

Address.

 To log in:

1. Type http://192.168.0.1 in the address field of your browser and press Enter to display

the login window. You can also enter either of these addresses to access the broadband

ADSL2+ modem: http://www.routerlogin.net or http://www.routerlogin.com.

admin

********

2. When prompted, enter admin for the modem user name and password for the modem

password, both in lowercase letters.

Note: The modem user name and password are probably different from

the user name and password for logging in to your Internet

connection. See Types of Logins on page 26 for more information.

If you do not see the login prompt:

1. Check the LEDs on the modem front panel to make sure that the modem modem i

plugged into an electrical outlet, its power is on, and the Ethernet cable between your

computer and the modem is connected to an Ethernet port.