User's Manual

NETGEAR VPN Configuration
172
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
d. In the Virtual Adapter list, select Disabled.
e. In the Internet Interface section, in the Name list, select Intel PRO/100VE Ne
twork
Connection (in this example; your Ethernet adapter might be different), and then in
the IP Addr field, enter 192.168.2.3 (in this example).
f. Click the Pre-Shared Key button.
g. In the Pre-Sha
red Key screen, click Enter Key. Enter
the N600 Wireless Dual Band
Gigabit ADSL2+ Modem Router DGND3700’s pre-shared key and click OK. In this
example, 12345678 is entered, though the screen shows asterisks. This field is
case-sensitive.
5. Configure the VPN Client Authentication Proposal.
In this step, you provide the type of encryption (DES or 3DES) to be used for this
connecti
on. This selection has to match your selection in the VPN router configuration.
a. In the Network Security Policy list on the left side of the Secu
rity Policy Editor window,
expand the Security Policy heading by double-clicking its name or clicking the +
symbol.
b. Expand the Authentication subheading by double-clicking its name or
clicking the +
symbol. Then select Proposal 1 below Authentication.
c. In the Authentication Method drop-down list, select Pre-Shared Key.
d. In the Encrypt Alg drop-down list, select the type of
encryption. In this example, use
Triple DES.
e. In the Hash Alg drop-down list, select
SHA-1.
f. In the SA Life drop-down list, se
lect Unspecified.
g. In the Key Group drop-down list, se
lect Diffie-Hellman Group 2.