Manualshelf

Quick Start Manual

ManualsBrandsNetgear ManualsModemsNetgear DGND3300v2
37383940414243444546
Technical Specifications 39
Default Configuration
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for
three seconds. Your device will return to the factory configuration settings shown in the table
below.
Feature Default Behavior
Router Login
User login URL http://www.routerlogin.net or http://www.routerlogin.com
User name (case sensitive) admin
Login password (case sensitive) password
Internet Connection
WAN MAC address Use default address
WAN MTU size 1458 for Annex A World except NA, 1492 for Annex A NA
and Annex B
ADSL line rate automatically negotiated
Local Network (LAN)
Lan IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
DMZ Disabled
Time zone GMT for Annex A except NA and Annex B; PST for NA.
Time zone adjusted for daylight saving
time
Disabled
SNMP Disabled
Firewall