Quick Start Manual

Installing Your Router Manually (Advanced, Mac, and Linux Users) 19
Setting Up Your Router for Internet Access
When configuring your wireless router manually, you must log in to your modem router to set it up
initially and to make any changes to your wireless router’s settings later.
To access the router:
1.
Type http://192.168.0.1 in the address field of your browser, and then click Enter.
.
A login window similar to the one shown in Figure 13 will display.
The factory default state is reset when you use the Restore Factory Settings button.
See “Restoring the Default Configuration and Password” on page 36 for more
information.
You can also enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
Figure 12
Figure 13