Owner's Manual

USB Storage
86
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500
Creating a Network Folder
From the USB Storage (Advanced Settings) screen. Click the Create a Network Folder
button to open the Create a Network Folder screen:
Figure 52.
You can use this screen to create a folder and to specify its Share Name, Read Access, and
Write Access from All-no password to admin. The password for admin is the same one
that is used to log in to the wireless modem router main menu. By default it is password.
Note: You must click Apply in order for your changes to take effect.
Available
Network Folders
Folder Name Full path of the used by the Network Folder.
Volume name Volume name from the storage device (either USB drive or
HDD).
Total/Free Space The current utilization of the storage device.
Share Name • You can click the name shown or you can type it into the
a
ddress field of your Web browser.
• If Not Shared is shown then
the default share has been
deleted and no other share for the root folder exists. Click
the link to change this setting.
Read/Write Access • Shows the permissions/access controls on the Network
Fo
lder:
• All -no password allows all users
to access the Network
Folder.
• admin prompts you to enter the same password that you
us
e to log in to the wireless modem router main menu.
Table 6-5.
Fields Description