Owner's Manual

USB Storage
85
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500
Figure 51.
You can use this screen to specify access to the USB storage device. The following table
explains the fields and buttons in the USB Storage Advanced Settings screen.
Table 6-5.
Fields Description
Network Device Name The default is readyshare. This is the name used to access
the USB device connected to the wireless modem router from
your computer.
Workgroup If you are using a Windows Workg
roup rather than a domain,
the Workgroup name is displayed here.
Access Method Network Connection Enabled by default, this allows all users on the LAN to have
access
to the USB drive.
HTTP Disabled by default. If you enable
this setting, you can type
http://readyshare to access the USB drive.
HTTP (via Internet) Disabled by default. If you enable this
settings, remote users
can type http://readyshare to access the USB drive over the
Internet.
FTP Disabled by default.
FTP (via Internet) Disabled by default. If you enable this
settings, remote users
can access the USB drive via ftp over the Internet.