Owner's Manual

USB Storage
83
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500
You can also type \\readyshare in the address field of your Web browser.
Note: If you logged in to the wireless modem router before you connected
your USB device, you might not see your USB device in the wireless
modem router screens until you log out and then log back in again.
The following table explains the fields and buttons in this screen.
Table 6-4.
Fields and Buttons Description
Network Device Name The default is \\readyshare. This is the name used to
access the
USB device connected to the wireless modem
router.
Available Network
fol
ders
Folder Name Full path of the used by the Network Folder.
Volume name Volume name from the storage device (either USB drive
or HDD).
Total/Free Space Shows the current utilization of the storage
device.
Share Name • You can click the name shown or you can type it in
the address field of your Web browser.
• If Not Shared is shown then the default share has
bee
n deleted and no other share for the root folder
exists. Click the link to change this setting.
Read/Write Access • Shows the permissions/access controls on the
network fo
lder:
• All -no password allows all users to access the
network fo
lder.
• admin uses the same password that you use to log in
to
the wireless modem router main menu.
Edit button You can click the Edit bu
tton to edit the Available Network
folder settings. See Editing a Network Folder on page 84.
Safely Remove USB Device button Click to safely remove the USB device attached to your
wireless modem router. See Unmounting a USB Drive on
page 87.