Owner's Manual

Chapter 1. Hardware Setup | 9

N300 Wireless ADSL2+ Modem Router DGN2200

Unpack Your Modem Router

Your box should contain the following items:

• N300 Wireless ADSL2+ Modem Router DGN2200

• AC power adapter (plug varies by region)

• Category 5 (Cat 5) Ethernet cable

• Telephone cable with RJ-11 connector

• Microfilters and splitters (quantity and type vary by region)

• Resource CD with NETGEAR Genie setup

• Installation guide with cabling and modem router setup instructions

If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the

carton and original packing materials, in case you need to return the product for repair.

Hardware Features

Before you cable your modem router, take a moment to become familiar with the label and

the front and back panels. Pay particular attention to the LEDs on the front panel.

Label

The label on the bottom of the modem router shows the Restore Factory Settings button,

security PIN, preset login information, MAC address, and serial number.

Wi-Fi network name

MAC address

Serial

WPS

Restore

and password

Factory

ettings

number

security

Figure 1. Label on modem router bottom

See Preset Security on page 30 for information about preset security and MAC addresses.

See Factory Settings on page 138 for information about restoring factory settings.